Descargar Imprimir esta página

Chamberlain MotorLift GWAP120 Manual De Instalación página 18

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 46
PLEASE START BY READING THESE IMPORTANT SAFETY RULES - SAVE THESE INSTRUCTIONS
Such warning signs mean "take care!" They require that you pay attention if personal
injury and/or material damage is/are to be avoided. Please read these warnings carefully.
This motor has been designed and tested in such a way as to ensure optimum safety of
installation and use provided the following safety instructions are followed completely.
Non-compliance of the following safety instructions can result in serious personal injury
and/or material damage.
Please read these installation instruc-
tions carefully in order to avoid errors
and to ensure the flawless operation of
the shutter strap motor.
Any electrical work that may be neces-
sary should only be carried out by a
qualified electrician.
Examine the shutter strap motor prior to
installation to ensure it is undamaged.
A clean, undamaged and flexible strap
is a prerequisite enabling the motor to
perform optimally. The use of defective
equipment can result in personal injury
and/or material damage.
The shutter strap motor is only deemed to
be operational when it has been installed
and located in a closed housing.
Only use the shutter strap motor in a dry
environment together with the original
accessories (light sensor).
709156-2GB
IMPORTANT FITTING AND OPERATION INSTRUCTIONS
ATTENTION
When connecting the equipment to the
main supply, please ensure the main
plug is accessible at all time.
Access to it should not be blocked by cabi
nets or similar.
The electrical strap coiler should be located
in the same place as the mechanical strap
coiler.Suitable for all strap widths up to max.
18mm.
For shutters with mini plastic sections
approx. 4.0m
approx. 2.5m
approx. 2.5m
Please keep your receipt of purchase
and these installation instructions in a
safe place. Should you need to make
use of your warranty entitlement,
please submit the receipt together with
the item concerned.
In order to avoid damage to the shutter
installation during initial set up, the shutter
strap must be wrapped around the strap
spool at least twice when the shutter is
open.
3.0
3.0
, with mini aluminum sections
2
, with maxi plastic sections
2
.
2

Publicidad

loading