Discharge The Pipet; After Pipetting - VITLAB maneus Instrucciones De Manejo

Auxiliar de pipeteado / pipette controller
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7.5 Discharging the pipet
Hold the collecting vessel at an angle. Place
the pipet tip against the inner wall of the
vessel, push down the pipetting lever (4) to
dispense the liquid.
Free discharge for pipets with waiting
time (Imprint e.g."Ex+ 15 s")
– As soon as the meniscus stops moving,
start the necessary waiting time
(e.g. 15 sec).
– Wipe the pipet tip along the wall of the
vessel by sliding upwards a few millime-
ters.
Blow-out pipettes
(Imprint "ausblasen – blow out"):
– As soon as the meniscus in the pipette
tip comes to a standstill, press the blow-
out bellows (2) once.
– Wipe the pipette tip a few millimeters
upward along the wall of the vessel.

7.6 After pipetting

To remove the pipet, gently grasp near the
top and carefully remove with a twisting
motion.
25

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para VITLAB maneus

Tabla de contenido