Vaisala Indigo 202 Guía Rápida página 11

1.7 Attaching Probes and Cables
3
Figure 5 Attaching Probes and Cables to Indigo
1 Insert probes into the probe connector with the orientation mark facing out.
2 Probes are locked in place with the locking wheel. Never turn from the probe body.
3 Connect probe cables in the same way as probes: insert the cable in the connector and
hold in place while turning the locking wheel.
Check the connection instructions in your probe's documentation. Certain probes can only
be connected using a cable.
1. Insert the probe into the probe connector with the orientation mark on the probe body
facing out.
2. Hold the probe in the probe connector and lock it in place by turning the locking wheel
counterclockwise. Do not turn the probe body when attaching, only the locking wheel
on the transmitter.
3. When the transmitter recognizes the connected probe, it shows a notification message
on the display (for example, Probe Connected: GMP251).
2
1
Chapter – Indigo 202 Quick Guide
11