Using The Utilities; Installing Ps-Utility - Atlantis Land NetServer Pro Guia De Inicio Rapido

7. Connect the DC end of the AC Power adapter to the DC power input
socket of the print server and the AC end to the wall outlet. This will
supply power to the print server immediately.

1.6 Using The Utilities

This section describes the software utilities for NetMaster Pro:
PS-Utility
PS Wizard

1.6.1 Installing PS-Utility

Follow the procedure outlined below to install PS Utility:
1. Insert NetServer Pro's Installation CD into the CD-Rom drive.
2. In the main screen, please select A02-PSU-W54.
3. Click on PS-Utility.
4. Once executed, the Setup program will extract files to launch the
InstallShield Wizard; then, follow it step by step to complete the
installation process
After installing the utility, the application program for the print server is
automatically installed to your computer, and creates a folder in
Start\Programs\PS-Utility. Now, you can begin using PS Utility.
Your print server is built with a default IP Address. To
prevent from any conflict in your network, it is
recommended to use the PS-Utility program to
change the IP setting when there is some other
device's IP Address is the same as the print server's
default IP Address.
ENGLISH
25