Launching Ps-Utility - Atlantis Land NetServer Pro Guia De Inicio Rapido

1.6.2 Launching PS-Utility

To launch PS Utility:
1. Click Start -> Programs -> PS-Utility, and then click the PS-Utility
v3.11 item.
2. The main screen will appear as below, and it starts to search the
connected print server within the network.
1. Device List: Display the connected print server within the network.
2. Control Buttons: Setup Wizard, Change IP Address, Update
Firmware, Show Web Setup, Factory Reset, Print Test, Discover
Device, About, and Close.
To avoid the conflict in your network, you can use PS-
Utility to change the related settings of your print
server (such as the IP address) after finishing the
installation.
ENGLISH
26