Publicidad
Pauze /Hervatten (Resume)
Druk eenmaal op de groene toets
Volumeregeling
Druk eenmaal op de volumetoets + / -
Druk op de volumetoets + / - en houd
Volgende/vorige track
die 2 seconden ingedrukt
Specificaties
Technologieën
Bluetooth 5.0, A2DP, AVRCP, HSP, HFP
Werkingsbereik Maximale
33 voet/10 m
Gespreksduur
Tot 15 uren
Standby tijd
Tot 1000 uren
Oplaadtijd
2 uur
Ingangsvermogen
DC 5V
Type van de accu
600mAh Li-polymeer accu
Aanbevolen verzorging en Onderhoud
● Zet de handenvrije set uit wanneer hij niet wordt gebruikt
of wanneer u die opbergt.
● Bewaar de handenvrije set op een plaats ver van extreme
warmte en van vochtigheid.
● Gebruik geen chemische producten of detergenten om
het product schoon te maken.
● Hoge temperaturen kunnen de levensduur van de interne
elementen verkorten
Charging the battery
1. Plug the cable into a suitable electrical socket.
2. Plug the USB cable into the hands-free set.
3. When charging, the red LED will light up. When charging
is complete, the red LED goes out. You can separate the
handsfree set from the cable after the red LED goes off.
4. If the red LED blinks while the device is in use, the device
has to be charged.
5. The charging time is about 2 hours.
Switching the handsfree on or off
Option 1: Switch the Power Switch button to ON side, it will
enter into pairing mode directly, the LED light will flash in red
and blue alternatively. Switch the Power Switch button to OFF
side will power off the AUTO-T Kit.
Option 2: When the Power Switch button is ON: press and
hold the red button for 3 seconds to make AUTO-T Kit
powered off and the red LED light will flash 5 times; press and
hold the green for 3 seconds to make the AUTO-T Kit
powered.
Note: After switching on, AUTO-T Kit will go into auto-pairing
mode and connect to the mobiles, which were paired before.
Pairing
Your AUTO-T Kit needs to be paired to your Bluetooth mobile
phone before it can be used. This is a two part process; one
part is carried out on the handsfree and the other is carried
out on the mobile phone.
Note：that different mobile phones use different methods
of pairing.
To pair your AUTO-T Kit with an mobile phone:
1. When the AUTO-T Kit power on, it will directly enter into pairing
mode, the LED light will flash in red and blue alternatively. This
indicates that the AUTO-T Kit is set in pairing mode.
2. Use your phone's menu to search for Bluetooth audio
devices. The phone should indicate it has found the kit
headset. Confirm that you want to pair your mobile phone
and handsfree together. If you are unsure how to go
through the pairing process on your mobile phone, please
refer to the user manual.
3. When asked for a pin key, enter: „0000". Your phone will
confirm that pairing has been successful.
Note: that there is usually a time limit to pair devices.
Simultaneously Pairing with Two Devices
1. First, follow the instructions in the 'Pairing' section to pair
the AUTO-T Kit with Device 1.
2. Once paired, disable pairing function on Device 1, the
AUTO-T Kit will enter into pairing mode again.
3. Next, follow the instructions in the 'Pairing' section to pair
with the Device 2 (Device 1 Pairing function Off).
4. Once paired with Device 2, reactive Pairing function on
Device 1 and the AUTO-T Kit will automatically reconnect. If
the first device couldn't be connected automatically, you
could connect it manually.
5. You can now make & receive calls from either of the two
paired devices.
Controls & Voice Notification
Making Calls
Once paired with your smartphone, incoming phone calls
can be managed via remote control.
Press the green button once
To answer a call
To end a call
Press the red button once
To adjust the volume
Press the volume + or – button
Double press the green button
To redial last number
To reject an incoming call
Press the red button once
During a call, press and hold the Volume
To mute / resume a call
- button for 2 seconds
Press and hold the green button for 1.5 seconds to
Voice switching
switch between Auto-t Kit and your phone for talking
In the standby mode, press & hold the green
button for 2 seconds to activate the voice
Siri or Voice Command
command function on Andriod or iOS devices.
Refer to the phone manual for detailed
instruction if applicable.
During a call, Double Press the green button
Device switching
to switch between two mobile phones
Streaming Audio
Once paired, you can wirelessly stream audio from your
device to your Auto-t Kit. Music will automatically pause when
you receive an incoming phone call, and resume once the
call is finished.
Press the green button once
Pause/Resume
Volume Control
Press the volume +/- button once
Press and hold the volume + / - button for
Next / Previous Track
2 seconds
Specifications
Technologies
Bluetooth 5.0, A2DP, AVRCP, HSP, HFP
Maximum Working Range
33 ft / 10 m
Talk Time
Up to 15 Hours
Standby Time
Up to 1000 Hours
Charging Time
2 Hours
Power Input
DC 5V
Battery Type
600mAh Li-Polymer battery
Suggested Care & Maintenance
● Please power off when not in use or before storing
● Please keep away from excessive heat and humidity
● Do not use chemicals or detergents to clean this product
● Extreme temperatures can shorten lifespan of internal
components
Warranty & Customer Support
For questions, assistance, support, or warranty claims
please contact us with
E-mail address as follows:
infoconso@impex.fr
Publicidad
