Predator S140UV Manual Del Usuario página 16

The control pad is conveniently located on the right side of your S140UV
Red LED solid = Away Mode (returns to Normal Mode after 2 hours or user input
is detected, whichever comes fi rst).
Green LED solid = scalable ozone setting.
Operating your S140UV
Press the POWER button to turn the unit on and off .
Press the FAN buttons to adjust the 3 speed fan.
Push the "AWAY MODE" button once and the unit will go into
Away Mode.
Indicator light will be illuminated red.
Push the "AWAY MODE" button a second time and the unit
goes into the scalable ozone mode.
When the unit is in the scalable ozone mode, the indicator
light will be illuminated green.
Push the "AWAY MODE" button a second time and the unit
goes into the scalable ozone mode.
When the unit is in the scalable ozone mode, the indicator
light will be illuminated green.
In the scalable ozone mode, the S140UV unit will operate in
a 20%-on, 80%-off mode, over a one minute total cycle time.
This means the unit will continuously cycle the ozone plate
on, at maximum output, for 12 seconds and then transition
to ozone plate off for 48 seconds ... then repeat.
Push the button again, and the unit will revert to the
"Normal" operation mode.
CAUTION:
Away Mode is intended for unoccupied spaces only. Please be sure all people
and pets have vacated the area when Away Mode is in use.
CONTROL PAD AND LED LIGHTS
on/off power
Fan speed +
Fan speed –
Green & red LED
Away mode
CONTROL PAD INFORMATION
- 4 - - 4 -
control panel