OPERATING THE UNIT
Removina the collected water
2. Continuous draining
● Water can be automatically emptied into a floor drain by
attaching the unit with a water hose (Id≥Ф5/16" , not included)
with a female threaded end (ID:M = 1" , not included)
NOTE: On some models, the female threaded end is included
● Remove the plastic cover from the back drain outlet of the unit
and set aside, then insert the drain hose through the drain
outlet of the unit and lead the drain hose to the floor drain or a
suitable drainage facility. (See.Fig.9 and Fig.10)
● When you remove the plastic cover, if there is some water in
the back drain outlet of the unit you must dry it. Make sure the
hose is secure so there are no leaks and the end of the hose is
level or down to let the water flow smoothly.
● Direct the hose toward the drain, making sure that there are no
kinks that will stop the water flowing. Make sure the water hose
is lower than the drain hose outlet of the unit.
● Select the desired humidity setting and fan speed on the unit
for continuous draining to start.
NOTE: When the continuous draining feature is not being
used, remove the drain hose from the outlet, and dry the water
in the continuous drain hose outlet.
3. Pump draining (on some models)
● Water can be automatically emptied into a floor drain or a
suitable drainage facility by attaching the pump drain out with a
pump drain hose (Фod=1/4", supplied).
● Remove the continuous drain hose from the unit and install the
plastic cover to the continuous drain hose outlet of the unit by
clockwise rotation. (See Fig.11)
● Resert the pump drain hose into the pump drain hose outlet for
depth of 15mm at least (See Fig.11), then lead the water hose
to the floor drain or a suitable drainage facility.
● Press the pump pad of the unit to activated the pump
operation. When the bucket is full the pump starts to work.
NOTE: The pump may cause big noise when it starts to work
for 3~5 minutes. It is a normal phenomenon.
Remove the plastic
cover by couter-
clockwise rotation.
Female threaded
Drain hose
Reinstall the plastic
cover
Pump drain hose outlet
18
Fig.9
end
Fig.10
Pump drain hose
Fig. 11