Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING: Risk of fire or electric shock. Do not alter, relocate or remove wiring, lampholders, power
supply or any other electrical component.
WARNING: Risk of fire or electric shock, LED retrofit kit installation requires knowledge of the construction
and operation of the luminaires electrical systems and the hazard involved. If not qualified, do not attempt
installation. Contact a qualified electrician.
WARNING: Risk of fire or electric shock. Install this kit only in the luminaires that has the construction
features and dimensions in photographs and/or drawing.
WARNING: Do not make or alter any open holes in an enclosure of wiring or electrical components during
installation.
Suitable for use with luminaires with a minimum of 75°C supply conductors.
The retrofit kit is accepted as a component of a luminaire where the suitability of the combination
shall be determined by CSA/UL or authorities having jurisdiction.
Fits in Progress 6" Series, P87, P187, P821, P86, P186, 5" Series, P85, P185, P84, P184, 4" Series, P830, P831, P832.
Fits in most competitive recessed housings with "A" & "B" dimensions listed below.
See www.progresslighting.com for more details.
NOTE:
THIS UNIT IS DESIGNED TO FIT 4", 5", AND 6" RECESSED HOUSINGS. THE ILLUSTRATION BELOW SHOWS THE
HOLE LOCATION FOR EACH SIZE HOUSING. ATTACH THE SPRING CLIPS TO THE BRACKET AS NOTED. THE
SPRING CLIPS ARE DESIGNED TO WORK WITH MOST TOLERANCES OF EACH SIZE HOUSING. SEE THE CHART
BELOW FOR "MINIMUM" AND/OR "MAXIMUM" DIMENSIONS.
THE VIEWS BELOW SHOW HOW THE SPRING CLIPS SHOULD LOOK AFTER BEING MOUNTED TO THE BRACKET.
BE SURE TO TIGHTEN SCREWS SECURELY.
RECESSED HSG
MINIMUM
DIAMETER
DIAMETER
4 INCH Ø
5 INCH Ø
6 INCH Ø
TOP VIEW OF BRACKET ASM
KEEP THESE INSTRUCTIONS
MAXIMUM
DIAMETER
3 7/8"
4 1/4"
4 7/8"
5 1/4"
5 7/8"
7 1/8"
MINIMUM HEIGHT
CLEARANCE
3 1/2"
3 1/2"
3 1/2"
SIDE VIEW OF BRACKET ASM
PAGE 2 OF 2
6" DIAMETER CAN
5" DIAMETER CAN
4" DIAMETER CAN
SPRING
CLIP
SPEC. NO. 93048395
03-18-16
Publicidad
