Avtech IC-AVH516 Manual De Instrucciones página 14

To solve this, use our brand's IP camera, and reconfigure its IP address to 10.1.1.xx (xx ranges from 11 ~
253), in the same network segment as the recorder.
a) Move your mouse to the left to call the quick bar, and select "
camera with its connection status to this recorder and MAC address.
b) Select the IP address which is not used, and select "SETUP".
IP PORT
10.1.1.12 88
10.1.1.12 88
10.1.1.13 88
10.1.1.13 88
10.1.2.14 88
10.1.2.14 88
10.1.1.15 88
10.1.1.15 88
10.1.1.16 88
10.1.1.16 88
10.1.1.17 88
10.1.1.17 88

c) Select "DHCP" in "NETWORK TYPE".
d) Click "APPLY" and "EXIT" to save your changes.
NETWORK TYPE
IP
PORT
USER NAME
PASSWORD
NETMASK
GATEWAY
PRIMARY DNS
e) The recorder will then detect the IP camera and display images soon.
IP SEARCH
MAC
00:0e:53:e5:9a:f1 IP CAMERA
UNKNOWN IP CAMERA
00:0e:53:a6:91:18 IP CAMERA
UNKNOWN IP CAMERA
00:0e:53:a5:9f:a2
00:0e:53:a5:9f:a2
00:0e:53:e1:4e:k5 IP CAMERA
UNKNOWN IP CAMERA
00:0e:53:s5:3e:h6 IP CAMERA
UNKNOWN IP CAMERA
00:0e:53:e6:4b:26 IP CAMERA
UNKNOWN IP CAMERA
SETUP
DHCP
10.1.1.14
88
admin
*****
255.0.0.0
10.1.1.10
168.95.1.1
APPLY EXIT
8
". You'll see the list of every connected IP
TYPE PROTOCOL
AVTECH
ONVIF
AVTECH
ONVIF
SWITCH AVTECH
SWITCH AVTECH
AVTECH
ONVIF
AVTECH
ONVIF
AVTECH
ONVIF
CONNECT SETUP
CONNECTION
STATUS
CONNECTED TO CH1
CONNECTED TO CH1
CONNECTED TO CH2
CONNECTED TO CH2
UNUSED
UNUSED
CONNECTED TO CH3
CONNECTED TO CH3
CONNECTED TO CH4
CONNECTED TO CH4
CONNECTED TO CH5
CONNECTED TO CH5
EXIT