Troubleshooting
If you have any problems with your appliance, you should check the
troubleshooting prior to calling Montpellier Customer Care.
If the appliance is not working, check:
That there is power to the appliance.
•
The house fuses are intact and the fuse in the plug has not
•
blown.
The freezer has not been turned off (page 9).
•
The plug socket is functioning fine. To check this, plug another
•
electrical appliance in to see if the socket is faulty.
If the appliance is working, but not very well, check:
The appliance is not overloaded.
•
The thermostat is set to an appropriate temperature.
•
The doors are closing properly.
•
The cooling system at the rear of the appliance is clean and free
•
of dust, and not touching the rear wall.
There is enough ventilation at the side and rear walls.
•
This can be due to the decor door(s) not being properly fitted,
•
causing the freezer door to not close properly thus letting warm
air in. If you are at all unsure, ask your fitter to check the decor
doors.
If the appliance is noisy, check:
The appliance is level and stable.
•
The side and rear walls are clear, and there is nothing resting on
•
the appliance.
Note: The cooling gas in the system may make a slight bubbling or
•
gurgling noise, even when the compressor is not running.
12