Cleaning And Care - Klarstein 10029404 Manual De Instrucciones

MODE button
Press it once, enter into Natural Mode, with LED tiny light; Press it again, enter into Sleep Mode, with LED
complete light; Press it the third time, enter into Normal Mode, with no LED light;
TIMER button
Press it, the default time is 1h.. You can press the timer buttons continually to set the timer off function bet-
ween 1 and 7 hours, with its corresponding LED light..
COOL button
Press it, to activate the COOL function, with the operation of the water pump. When it feels water shortage
for 10s, it will make a sound "B-B-B-B-B-B", after six times, the water pump will cut-off and its LED light will
go out.
Remote Control
The same operation as the control panel.
Cold Wind And Humidification Function
Take off the cover of the water tank, put the ice
box(after iced in the fridge) or ice block into the
water tank, adding water according to the water
lever display, then cover the water tank.
Draing the Water
When not in using for long time, please discharge the water in the water tank timely, to keep it clean. Move the
unit to a drain and pull the plug out of the water outlet.
• Unplug the fan before cleaning.
• se only a soft, damp cloth to gently wipe the outer surfaces of the fan clean.
• To clean between the grilles, we recommend using a pipe cleaner, flexible dust wand, vacuum cleaner or
compressed air to gently remove the dust.
• DO NOT immerse the fan in water and never allow water to drip into the motor housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
• For storage, you may leave the fan assembled and covered to protect it from dust. Store the fan in a cool,
dry, place.

Cleaning and Care

8