Hotpoint JEH3002BBE Manual De Uso Y Cuidado página 32

Button electronic ignition ranges
(Applies to all models)
When pushing the button or turning the knob, ig-
nitors will automatically spark on all burners. This
is normal.
1. Make sure knobs are in the off position, if equipped
with mechanism knobs, they should be in the "out"
position. Make sure range is plugged in to electric
power.
2. Press and hold the electronic ignition button, marked with a thunder icon, you will hear
the characteristic sound of the burner's electric ignitor.
3. Press the knob that corresponds to the burner you want to use and turn it to HIGH, the
burner will light within few seconds. Once lit, release the button and regulate the flame
size turning the knob.
IN THE EVENT OF A POWER OUTAGE, YOU CAN LIGHT SURFACE
BURNERS BY APPROACHING A LIT MATCH TO THE BURNER, THEN
CAREFULLY TURN THE KNOB TO "HIGH". BE CAREFUL WHEN TURN-
ING ON THE BURNERS THIS WAY.
BURNERS THAT WERE LIT AT THE MOMENT OF THE POWER OUTAGE
WILL STAY OPERATING NORMALLY UNTIL THEY ARE TURNED OFF.
TO ENSURE A CORRECT OPERATION OF THE GRILL, IT MUST BE RUN
AT LOW FLAME.
IF THE LEVEL OF YOUR GAS TANK IS LOW, THEN THE YELLOW
FLAMES ARE A SIGN OF THIS CONDITION.
IF AFTER PERFORMING THE AIR SHUTTER ADJUSTMENT THE YELLOW
FLAMES WON'T DISAPPEAR, FIND THE TELEPHONE NUMBER OF
SERVIPLUS ON THE LAST PAGES OF THIS MANUAL, THEY WILL PER-
FORM THE APPROPRIATE ADJUSTMENTS.
32
HIGH LOW