Clearing Custom Programming; Important; Restoring Factory Default Settings - One for All URC-4220 Manual Del Usuario

3.

CLEARING CUSTOM PROGRAMMING

The One For All 4 Device Universal Remote Control contains an
program.
Feature Reset
If desired, you can use it to clear custom programming, except your setup
codes and reassigned device keys, and reset them to original factory set-
tings. Also see

Restoring Factory Default Settings

IMPORTANT: Executing this program will erase all your custom settings for
Power Macro, Favorite Channels, and Volume Lock.
1.
2.
RESTORING FACTORY DEFAULT SETTINGS
The One For All 4 Device Universal Remote Control also contains a
program that you can use to reset all custom settings and setup codes
Reset
to original factory settings.Also see
IMPORTANT: Executing this program will erase all your custom settings for
Power Macro, Favorite Channels, Volume Lock, Reassigned Devices, and all
device settings.
1.
2.
Volume will again be independently controlled according
to its default states for all programmed devices.
Press and hold
then release
SET
Enter - - . The
9 8 0
will return to normal operation.
Press and hold
then release
SET
Enter - - . The
9 8 1
will return to normal operation.
as below.
until the
SET LED
.
will blink twice. The remote control
LED
Clearing Custom Programming
until the
SET LED
.
will blink twice. The remote control
LED
14
Operational
(red light) blinks twice,
(red light) blinks twice,
Factory
as above.