Replacing The Battery - GE Druck ADTS 542F Guía De Seguridad E Instalación

Chapter 2. ADTS Touch
Connector (4) allows connection between the base unit and the ADTS Touch using a 5 metre
or 18 metre umbilical cable.
Note: Only use cables that have been supplied by or purchased from GE.
4
Figure 2-3: ADTS Touch Umbilical Cable Connector
The ADTS Touch can contain one Lithium-ion battery which is housed in the battery
compartment of the ADTS Touch.

2.1 Replacing the Battery

5
5
Figure 2-4: ADTS Touch Battery Compartment
Note: Only use batteries that have been supplied by or purchased from GE.
Prior to replacing the battery, switch the ADTS Touch off. If the ADTS Touch is connected to
the umbilical cable or Docking connector, disconnect prior to removing the battery cover
plate.
8 | ADTS Safety and Installation Guide-English © 2014 General Electric Company – All rights reserved.