Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
10.
Press <ENTER> return to the manual or remove the
test clamps from the battery posts after completion of
testing batteries to end test.
SYSTEM TEST
1.
Press ▼/▲key to select Item
2. SYSTEM TEST
Press <ENTER> button.
2.
Turn off all vehicle accessory
loads such as light, air
conditioning, radio, etc. before
starting the engine.
3.
When the engine is started, one of the three results will
be displayed along with the actual reading measured.
CRANKING VOLTS NORMAL
The system is showing normal
draw. Press <ENTER> to
perform the charging system
test.
CRANKING VOLTS LOW
The cranking voltage is
below normal limits,
troubleshoot the starter
with manufacturers
recommended procedure.
CRANKING VOLTS NO DETECTED
The cranking voltage is not
detected.
4.
If the cranking voltage is
normal, press <ENTER> to
begin charging system test.
1. BATTERY TEST ↵
. 2. SYSTEM TEST
3. LANGUAGE
TURN OFF LOADS
START ENGINE
CRANKING VOLTS ↵
××.××V
CRANKING VOLTS
××.××V LOW
EN - 12
Example :
NORMAL
CRANKING VOLTS
NO DETECTED
PRESS ENTER FOR
CHARGING TEST
MAKE SURE ALL ↵
LOADS ARE OFF
Publicidad
Tabla de contenido
