Publicidad
Idiomas disponibles
Idiomas disponibles
Assembling the ExerSaucer
L
M
N
O
N
P
10. Insert a strap
O
through a strap slot
P
in the tray
Q
the strap anchor
lies flat against the bottom of the tray, as shown. Repeat for the other two straps.
inserted and resting against the bottom of the tray.
8. Press assembled seat
L
down firmly onto the top of the
M
tray
until it snaps into place and spins freely.
9. Lean the tray assembly
N
against one of the pylons,
as shown.
O
N
. Pull the strap completely through the tray making sure
WARNING
4
1
1
2
2
3
3
and bounce features. Discontinue use when baby can stand flat-footed at the highest setting.
ALWAYS remove baby from ExerSaucer before adjusting. Unlock the adjustment knob
until the desired height is obtained (there are three positions). Turn the adjustment knob to the left to lock in place. Repeat the
adjustment on the other two pylons. Note: Make sure that all three legs are adjusted to the same position.
IMPORTANT: Always make sure the adjustment knobs are locked in position before placing the child in the activity center.
Q
UNLOCK
ADJUST
1
2
A
A
3
WARNING
DO NOT allow the baby to stand flat-footed on the base. As baby grows
5
Adjusting the Height
LOCK
A
A
by turning to the right, then moving
Attaching the Toys
3 "AAA" Batteries
Publicidad
