Publicidad
Idiomas disponibles
Idiomas disponibles
Timer
Press the
button until the
indicator is
selected on the display. Use the + and - to
increase or decrease the timer hours in the
following sequence: 1h > 2h > 4h > 8h > OFF.
Once the timer is activated, the device will
automatically shut down after the set timer has
been completed.
WIFI mode
Press and hold the
button for 3 seconds until
the
starts flashing on the display. Press and
hold again for 3 seconds to deactivate the WiFi
mode.
WIFI and APP operation
Scan below QR code to download the Duux APP
or search DUUX APP in the App Store or Google
Play Store to start the procedure to download the
APP. Once installed, enter your e-mail address and
complete the registration.
12
APP STORE
PLAY STORE
Connect to WIFI
Once registered, click "add duux device" on the
1
main screen or use the "+" button in the top
right corner to add a new device.,
Search for "Beam mini" and press to continue
2
Connect to your preferred WiFi network and
3
enter the corresponding password
Follow the instructions in the app to complete
4
the pairing process.
Display icons
Water replacement
indicator
When the indicator flashes red, it indicates that
there is water shortage. Please remove the top
cover and add water.
Auto mode
When this indicator light is on, it means the
humidifier is operating in AUTO mode.
Mist output level bars
The amount of bars determine the mist output
intensity set in manual operation mode. There are
three mist output levels: LOW
,
MEDIUM
, HIGH
WIFI indicator
When the indicator light blinks, it means it's idle
and looking for a device to pair. If it's solid, it means
the device is connected.
Timer indicator
When the indicator lights up, it means you have
entered the timer mode. Below you will see the
number (1, 2, 4 or 8H) of hours on which the timer
is activated.
Display brightness
The display will automatically dim after the last
touch or press.
Water shortage
If there is no water remaining in the water tank, a
beep will sound 3 times, and the water shortage
icon will automatically return to the standby state
after flashing 1 minute.
Control panel / remote control
The control panel is integrated in the remote
control. When not in use, we recommend placing
the remote control back in the holder on the
device. Remote control battery is included (type:
CR2032). Please note the polarity when inserting
the battery.
13
Publicidad
