HOMEDEPOT WL0940DMD40 Manual De Instrucciones página 3

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
GENERAL:
1. All electrical connections must be in accordance with local, and
national electrical codes.
2. Prior to installation it is important to follow the following guidelines:
A. Turn off the main power at the circuit breaker before installing the
fixture, to prevent possible shock.
B. Be sure that all wires were not damaged during installation and
that there are no rough or sharp edges in contact with the wires.
WARNING:
•
Min 75°C supply conductors, Type IC, INHERENTLY
PROTECTED.
•
This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and
operation of the product and the hazards involved.
•
Blinking light of this thermally protected luminaire may indicate
overheating.
•
Vapor barrier must be suitable for 90°C.
•
Suitable for damp locations.
1 Luminaire