4. Replacing / inserting batteries
The display shows when the batteries are empty. The battery indicator flashes on
the display.
Open the battery compartment lid at the back of the removable panel. Remove
the cap and insert two AA 1.5V batteries. Particularly make sure the polarity of
the contacts is correct. Then close the battery compartment cover. Replace the
control panel into the watering system computer.
Caution! Use only new batteries. Do NOT use
rechargeable batteries.
5. Initial use
Time and day
1.
Press the menu (Menu) button to adjust the time. The TIME starts flashing
in the display. Press the OK button to access the setting.
2.
The hour display then starts flashing. Use the dial to adjust the hours. Turn
it left to reduce the value or
turn it right to increase the value. Once you reach the desired hour,
confirm by pressing the OK button.
3.
Then the minute display starts flashing. Using the dial,
adjust the minutes desired and confirm by pressing
the OK button.
4.
Next, the current day is highlighted. Select the current day using the dial
and confirm it using the OK button.
Note: The menu items of hour, minute and day can also be navigated using the
"Increase value" and "Decrease value" buttons.
14
English