Sveon SPM200 Manual De Usuario página 29

4. During the upgrade of the firmware please don´t
press any button of the remote control. It is very im-
portant you don´t disconnect the device. If during
the firmware upgrading, the device is suddenly dis-
connected from the power outlet, it could cause im-
portant damages.
5. When the firmware upgrade finishes, the unit will be restarted automatically.
6. Disconnect the USB memory and delete the file.
If you have any doubt please contact with your Technical Support department:
16. FAQs
The remote control doesn´t work.
Please make sure the batteries are properly installed or charged.
The audio signal is disabled.
Check if the "Mute" option is enabled or not.
Check in "Setup" menu if the audio output is properly selected accordingly to the connection.
If you are playing a file with different audio tracks please check if you have selected the correct audio track by pressing
"Audio" button of the remote control serveral times until find the correct option.
My TV doesn´t show signal.
Check if your TV and your SPM200 are powered on.
Check if the cables you have used to connect the STV200 to the TV are properly connected.
Check if the video output selected in the SPM200 is the same than the video output option selected in the TV. Press "TV
System" button to choose between the different video modes.
I can not access to the USB external devices.
Check if the USB device is properly connected to one of the USB Host ports of the unit.
If you are using an USB stick, please make sure the device is not protected against writting.
If you are using an external hard disk, please make sure it receives power enough to work. If it doesn´t, please connect
its power adaptor for a correct power supply.
Check if the device is formatted in FAT16/32 or NTFS.
In "Network" section doesn´t appear any IP address.
Check if you have connected a Wireless LAN Adaptor properly to one of the USB Host ports of hte unit. Check if your Rou-
ter assigns an automatic IP or if you have to enter the IP address in a manual mode.
There is not appear any shared file in Network section.
Please make sure if the file is shared in the PC and if it is connected through a network.
I can not connect through WLAN to the router.
Check if your SSID (wireless network name) is correct and if it is enabled.
If you have WEP password and you have converted the password, check if it is properly written.
Check if the WiFi signal is enough to have a good connection.
soporte@sveon.com
+34 902 402 503
SPM200 User guide
Index
1. Welcome
2. Features
3. Content
4. Hardware
5. Remote Control
6. TV Connections
6.1 AV Connection
6.2 YPbPr Connection
6.3 HDMI Connection
7. USB device connection
8. Playback from card reader
9. First time usage
9.1 Starter Screen
10. Main Menu
10.1 Movie
10.2 Music
10.3 Photo
10.4 File Copy
10.5 Setup
11. Basic operations
12. Network functions
12.1 Wireless LAN Connection
12.2.1 Infraestructure (AP)
12.2.2 Point to Point (Ad Hoc)
13. Files sharing
13.1 Windows XP
13.2 Windows Vista
13.2.1 Mode 1
13.2.2 Mode 2
14. File access through the network
14.1 My Shortcuts
14.2 My Neighbors
15. Firmware upgrading
16. FAQs
English 29