Telstar TVP301210MD Manual De Instrucciones página 9

OPERATING INSTRUCTION (SEE FIG.11)
1.
To make / stop the fan head oscillate, push down / push up the Clutch knob (7).
2.
Speed is controlled by turning the switch knob (10) (4 position: 0-1-2-3).
3.
Turn the knob of time switch (9) to the right and set the time. The time switch is cut
at the time within 120 minutes.
In case the switch is not used, set the time switch (9) to "ON".
4.
The airflow can be adjusted upward or downward by pushing the grilles lightly to
the desired up or down direction.
5.
The height of the fan can be adjusted by loosening the height adjustment ring (12)
carefully raising or lowering the fan and firmly re-tightening the height adjustment
ring (12).
MAINTENANCE INSTRUCTION
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if service
is needed.
1.
Before cleaning and assembling, fan must be unplugged.
2.
To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust. Do not
disassemble the fan to remove dust.
3.
Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4.
Do not use any abrasive detergent or solvents to avoid scratching the surface.
Do not use any of the following as a cleaner: gasoline, thinner.
5.
Do not allow water or any other liquid into the motor housing or interior parts.
CLEANING
1.
Be sure to unplug from the electrical supply source before cleaning.
2.
Plastic parts should be cleaned with a soft cloth moisten with mild soap.
Thoroughly remove soap film with dry cloth.
9
3 IN 1(MULTIFUNCTIONAL)FAN
TVP301210MD
Fig.11