Car-O-Liner CMI 300 PULSE Guía De Usuario página 17

Technical data 2
Power source
Mains voltage ±10% (50-60Hz), V
Phases
Minimum generator size, kVA
Minimum short-circuit power, MVA
1)
Fuse, A
Mains current effective, A
Mains current max., A
Power 100%, kVA
Power max., kVA
Power open circuit, W
Efficiency
Power factor
Current range, A
Duty cycle 100% 40°C, A/V
Duty cycle 60% 40°C, A/V
Duty cycle max. 40°C, A/%/V
Open circuit voltage, V
2) Sphere of application
3) Protection class
Standards
Dimensions (HxWxL), mm
Weight, kg
Wire feed speed, m/min
Torch connection
Wire dimension, mm
Wire spool diameter, mm
Wire spool, kg
Gas pressure, max., MPA (bar)
FUNCTION
Selection of trigger mode, 2-times / 4-times
Gas pre-flow, sec.
Soft-start, m/min
Hot-start, %
Hot-start-time, sec.
Slope down time, sec.
Final current, %
Final current time, sec.
Gas post-flow, sec
Spot welding time, sec.
Step welding time, sec.
DUO Plus™ value
Electronic choke
1) This equipment complies with IEC 61000-3-12 provided that the short-circuit power Ssc of the grid at the interface point is greater than or equal to the stated data in the
abovementioned table. It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment is connected only to a supply with a short-circuit power Ssc greater than or equal to the stated data in the abovementioned table.
2) S This machine meets the demand made for machines which are to operate in areas with increased hazard of electric chocks.
3) Equipment marked IP23S is designed for indoor and outdoor applications.
All manuals and user guides at all-guides.com
CMI 300 Pulse Boost
380-440 208-380 380-440 208-380
3 3 1 1
16 16 10 9
3.75
10/16/20 20 10/16/20 20
10.6 19.5 10.6 19.3
16.2 31.6 16.0 29.1
7.0 7.1 3.9 4.0
10.6 11.0 6.0 6.1
45 45 45 45
0.85 0.82 0.81 0.80
0.95 0.95 0.98 0.98
15-300 15-200
200/24.0 150/21.5
210/24.5 160/22.0
300/20/29.0 200/30/24.0
50-60
S/CE
IP23S
IEC60974-1. IEC60974-5. IEC60974-10 Cl. A
838x443x1003
52
0.5-30.0
EURO
0.6-1.6
300
5-18
0.6(6.0)
PROCESS VALUE RANGE
MIG/MAG 2/4
MIG/MAG 0-10
MIG/MAG 0.5-24.0
Synergic -99-(+)99
Synergic 0-20
Synergic 0-10
Synergic 0-100
Synergic 0-10
MIG 0-20
MIG 0-5.0
MIG 0.1-5.0
MIG 1-50
MIG -5-(+)5
CMI 300 Pulse Twin Boost
380-440 208-380 380-440 208-380
3 3 1 1
16 16 10 9
3.75
10/16/20 20 10/16/20 20
10.6 19.5 10.6 19.3
16.2 31.6 16.0 29.1
7.0 7.1 3.9 4.0
10.6 11.0 6.0 6.1
50 50 50 45
0.85 0.82 0.81 0.80
0.95 0.95 0.98 0.98
15-300 15-200
200/24.0 150/21.5
210/24.5 160/22.0
300/20/29.0 200/30/24.0
50-60
S/CE
IP23S
IEC60974-1. IEC60974-5. IEC60974-10 Cl. A
1104x597x1003
66
0.5-30.0
EURO
0.6-1.6
2x300
2x5-18
0.6 (6.0)
hereby declare that our machine as stated below
Type: CMI Pulse
conforms to directives: 2014/35/EU
European standards:
17
CMI 300 Pulse Trio Boost
380-440 208-380 380-440 208-380
3 3 1 1
16 16 10 9
3.75
10/16/20 20 10/16/20 20
10.6 19.5 10.6 19.3
16.2 31.6 16.0 29.1
7.0 7.1 3.9 4.0
10.6 11.0 6.0 6.1
55 55 55 45
0.85 0.82 0.81 0.80
0.95 0.95 0.98 0.98
15-300 15-200
200/24.0 150/21.5
210/24.5 160/22.0
300/20/29.0 200/30/24.0
50-60
S/CE
IP23S
IEC60974-1. IEC60974-5. IEC60974-10 Cl. A
1104x597x1003
70
0.5-30
EURO
0.6-1.6
3x200
3x5
0.6 (6.0)
EC DECLARATION OF CONFORMITY
CAR-O-LINER GROUP AB
Sweden
2014/30/EU
2011/65/EU
EN/IEC60974-1
EN/IEC60974-5
EN/IEC60974-10 (Class A)