GE RAVTRANS3 Instrucciones De Instalación página 3

STEP 3:
Adjust the Divider (if required)
1. Remove the front 2 screws and loosen the rear 2 screws.
2. Slide the divider toward the grille until it is sealed against the grille.
3. Tighten the 2 rear screws.
Front Screws
STEP 4:
Attach the Front Bracket to the Plenum
1. Align the front bracket with the plenum.
2. Fasten the front bracket to the plenum with the 6 screws provided.
Installation Instructions
Rear Screws
3
Tighten rear
screws
Divider moved into
position against the
exterior grille