Installing Your Cooker Hood - Infiniton CMPT-STL6T5 Manual De Usuario

⚫ Check inside the product and ensure that there is no transit packaging or any
other materials, such as packets of screws, guarantee etc. These should be
removed and kept for future use.
⚫ If possible, disconnect and move freestanding or slot-in cookers from their
position, to provide easier access to the rear wall and ceiling. If this is not
possible, then a thick, protective covering should be placed over the worktop,
hob top or cooker. This will help to protect these surfaces from damage and
debris.
⚫ Select a flat surface for assembling the cooker hood. Cover that surface with
a protective covering and place all cooker hood parts and fittings on it.
⚫ In addition check whether there is an electrical socket available, which will
be accessible after the hood is mounted. If you are going to use the appliance
in extractor mode, you should also ensure that there is space to connect a
fumes discharge device to the outside.
⚫ Raw plugs are provided to secure the hood to most types of walls and
ceilings. However a qualified technician must verify the suitability of the
materials, in accordance with the type of wall and ceiling. The wall and
ceiling must strong enough to take the weight of the hood.
Do not tile, grout or silicone this appliance to the wall. This appliance is designed
to be surface mounted only.

5.3. INSTALLING YOUR COOKER HOOD

IMPORTANT: YOU WILL HAVE TO DECIDE BEFORE INSTALLATION
YOUR COOKER HOOD WHETHER TO USE IT IN EXTRACTION
MODE OR RECIRCULATION MODE. PLEASE TURN TO PAGE 17
NOW TO UNDERSTAND THE DIFFERENCES BETWEEN THERES TWO MODES.
⚫ The cooker hood should not be exposed to a direct heat source from the cooking
device underneath it, i.e. naked flame from a gas burner or heat from electric hob
zones without a pan on them.
10