5) Hang the cooker hood onto the hook. And fix the machine into the wall at Hole A
6) Connect the check valve onto the top of the chimney section. And then connect
the ducting hose to the check valve.
⚫ The other end of the ducting hose should be connected to your discharge
outlet that is suitable for cooking vapors. It should have a cross section of at
least 150 ㎡.
⚫ The maximum distance between the check valve and your discharge outlet
should be 3 meters, with one 90 degree bend.
7) Install the Chimney Section C and Fixing Bracket E
⚫ Connect the Chimney Section C and
Fixing Bracket E. Put the bottom part
of this coupling on the cooker hood.
Mark the fixing holes between the
bracket and wall with a pencil. And
remove the Chimney Section and
Fixing Bracket E.
⚫ Using a drill bit with an 8 mm
diameter make holes in the wall on
the positions that you have marked,
and insert raw plugs. Screw the
chimney section and bracket fixing into the wall tightly.
12