Technical Data - Marmitek PROGUARD800 Serie Modo De Empleo

18. Thread the cables through the cable entry hole on the back cover and mount
the back cover to the wall using four screws.
19. Connect the transformer to the terminal block and the backup battery to the
battery connector.– see Figure 2 for further information on wiring connections.
20. Replace the metal anti-vandal casing and the strobe cover.
21. Replace the front cover and secure using the cover screw provided. Make
certain that the screw is secured tightly so that it closes the front cover tamper
switch.

TECHNICAL DATA

Frequency:
Antenna:
Operating Voltage:
Current Consumption:
Backup Battery:
Siren Output:
Tamper Protection:
Dimensions:
Specifications may be modified without prior notice.
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol
on the product and/or its packaging must not be disposed of with unsorted
municipal waste. The symbol indicates that this product should be disposed of
separately from regular household waste streams. It is your responsibility to
dispose of this and other electric and electronic equipment via designated
collection facilities appointed by the government or local authorities. Correct disposal and
recycling will help prevent potential negative consequences to the environment and human
health. For more detailed information about the disposal of your old equipment, please contact
your local authorities, waste disposal service, or the shop where you purchased the product.
OS826
868.35MHz FM
Built-in internal whip
12VDC or 9VAC (nominal)
250mA (alarm + strobe)
10mA (standby)
7.2V/910mAh NiMH (rechargeable)
106dB (A) @ 1m
Front cover, removal from wall and external power
supply.
300 x 170 x 75mm
6