Bluetooth Pairing - Soundcore Life P3 Manual De Instrucciones

Bluetooth Pairing

1. Open the charging case, the earbuds will automatically enter the Bluetooth
pairing mode.
• The 3 LED indicators on the charging case will flash white in sequence
continuously.
2. Select "Soundcore Life P3" on your device's Bluetooth list to connect. When
successfully connected, the LED indicators on the charging case will turn white
for 3 seconds.
• Pairing with another device: Place the earbuds in the charging case and leave
the case open. To enter pairing mode, press and hold the button on the case for
3 seconds until the 3 LED indicators flash white in sequence continuously.
• Each time you power on your Soundcore earbuds, they will automatically
connect to your last successfully connected device if available within the
Bluetooth range.
• Mono mode: When Bluetooth connected, you can use either one of the earbuds
only by placing the other one into the charging case.
• When powered on and connected, if either one of the earbuds is out of battery
and powered off, you can keep using the other one.
• When you are on a call, place either one of the earbuds into the charging case,
and the microphone in the other earbud will be activated.
3