Bluetooth Pairing - Soundcore Life P2 Mini Manual Del Usuario

Bluetooth Pairing

1. Tear off the insulation sticker on the earbuds before first use.
2. Place the earbuds in the charging case and close it.
3. Open the charging case (no need to take out the earbuds), the earbuds will
automatically enter Bluetooth pairing mode.
• The 3 LED indicators on the charging case will flash white in sequence
continuously.
4. Select "Soundcore Life P2 Mini" on your device's Bluetooth list to connect.
When successfully connected, the 3 LED indicators will turn white for 3 seconds
and then turn off.
• Pairing with another device: Place the earbuds in the charging case and
leave the case open. To enter pairing mode, press and hold the button on the
charging case for 3 seconds until the 3 LED indicators flash white in sequence
continuously.
• Each time you power on your Soundcore earbuds, they will automatically
connect to your last successfully connected device if available within the
Bluetooth range.
Mono mode: When Bluetooth connected, you can use either one of the
•
earbuds only by placing the other one into the chaging case and closing it.
• When powered on and connected, if either one of the earbuds is out of battery
3