Starting Instructions - Cojali jaltest JT3013 Manual De Instrucciones

2. Insert the cigarette lighter plug you are using into the cigarette lighter
socket, and insert it to keep it in good contact, turn on the power. There is
no switch control for this cigarette lighter, and the maximum output power
of the cigarette lighter seat is 180 W. When the external environment
is severely overloaded, the protection will be automatically cut off, and
the abnormality will be automatically restored after the abnormality is
eliminated. You can use the attached double-head cigarette lighter line
to charge the product with the 12 V cigarette lighter power supply of the
motor vehicle. This method only temporarily recharges the battery and
cannot guarantee full charge. Please use the normal charging method as
much as possible.
WARNING
When using the cigarette lighter to charge the product, make sure that
the external battery matches the product to avoid overcharging or even
exploding.

STARTING INSTRUCTIONS

WARNING
Check if the battery voltage specification of the started vehicle is 12 V or
24 V, otherwise the battery may explode. When using, please connect the
clamp correctly and reliably, and then rotate the switch of the machine
to the corresponding gear according to the standard battery type. When
using this unit to start, make sure the positive and negative connections
are correct, otherwise the battery may explode.When using the unit to
start, strictly follow the steps below, otherwise it will be dangerous:
1. Put the product high current switch 1 in the "OFF" position, and put the
auxiliary equipment and engine switch in the vehicle on the "OFF" state.
2. Clamp the red (+) clamp to the positive electrode (+) of the battery.
3. Clamp the black (-) clamp to the non-operating metal part of the engine
(negative ground) or to the battery negative.
4. If the positive and negative connections are wrong, the front display 8
displays "Er1" with a continuous alarm sound. In this case, you need to
exchange the positive and negative clamps and connect.
5