LF Millennium 69P1 Instrucciones Y Mantenimiento página 36

Use and maintenance manual | Series MILLENNIUM
2.2.3 Valve programming (model CRONO)
pointer-
NOTE
The valve is protected by a key lock indicated by the continuous ignition of the icon depicting a key
pointer-
NOTE
N.B. It will be possible to modify each value set in the valve, bearing in mind that if no changes are made
within 60 seconds, the valve will again enter a key lock with the appearance of the icon depicting the key
.
1) TIME SETTING
Press and hold the buttons at the same time
unlocked key appears.
Press the button and the symbol for the wrench will light up on the display
Press the button
flashing 12 - 00.
Use the buttons
Again press the button
12 - 00 will start flashing.
Use buttons
Confirm with the button
36
again and the first 2 digits of the display representing the hours of the day will start
to set the exact time.
and the second 2 digits of the display representing the minutes of the day
to set the exact minutes.
and wait 60 seconds until the key lock sounds with a beep.
for 5 seconds until you hear the sound and the
.
.