Publicidad
Idiomas disponibles
Idiomas disponibles
UK
"IMPORTANT: READ THE USAGE
INSTRUCTIONS CAREFULLY AND
KEEP THEM TO CONSULT THEM
LATER."
ASSEMBLY AND USE
Remove the platform and all the components from the packaging and remove the
bag.
Warning! Keep plastic bags away from children.
WHEELS
Place the Rollower platform upside down on a flat, resistant surface (Fig.1).
Take the washers and place them in the wheel support. (Fig.2)
Line the wheels up with the wheel supports and introduce them firmly into the
case until you hear a click. (Fig. 3)
CLAMPS
Loosen the safety screws at the back of the platform (Fig. 4) so the clamps can be
introduced and adjusted easily.
Introduce the support clamps (Fig. 5) but, for the moment, do not tighten the
screws. The screws will be properly tightened once the platform has been moun-
ted on the pushchair, depending on the size of the chair. (Fig. 5A)
CONNECTORS
To loosen the connector strap, press the adjustment button (A) and, at the same
time, pull the strap (B). (Fig. 6)
Undo the safety screw (C) until the lock is completely withdrawn (D). (Fig. 7)
The lock should now be lined up with the central body. (D) (Fig. 8)
WARNING
Each pushchair is a different size with different tubes.
When you fit the platform to pushchairs with square or rectangular tubes, always use
the connector adaptors (included) (Fig. 9) to fix it better to the flat surface of the tube.
(Fig. 10)
15
Publicidad
