Package Contents; Description (Fig. A); Electrical Safety - DeWalt DW932 Manual De Instrucciones

• Ensure that the blade is securely fixed and
rotates in the correct direction.
Guard against kickback
• Kickback occurs when the tool begins to stall
rapidly and is driven back towards the operator.
Release the switch immediately if the blade sticks
or the tool stalls.
• Keep the blades sharp.
• Support large panels near the cutting area.
• Do not remove the tool from the workpiece while
making a cut with the blade rotating. Release the
on/off-switch and wait for the blade to come to
a halt.

Package contents

The package contains:
1 Cordless biscuit jointer
1 Battery charger
1 Battery pack (K and KH models)
2 Battery packs (K2 and K2H models)
1 Dust bag
2 Dust adapters
1 Pin spanner
1 Torx screwdriver
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand
this manual prior to operation.

Description (fig. A)

Your D WALT cordless biscuit jointer DW932 has
E
been designed for making flat dowel joints in wood
and wood products.
1 On/off-switch
2 Top handle
3 Fence height adjuster
4 Dust extraction outlet
5 Adjustable fence
6 Anti-slipping pins
7 Plunge depth adjusting knob
8 Locking knob
9 Spindle lock
10 Star knob
11 Battery pack
23
Charger
Your DE9108 charger accepts D
battery packs ranging from 7.2 V to 18 V.
Your DE9116 charger accepts D
NiMH battery packs ranging from 7.2 V to 18 V.
11 Battery pack
12 Release buttons
13 Charger
14 Charging indicator (red)

Electrical safety

The electric motor has been designed for one
voltage only. Always check that the battery pack
power corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your D WALT charger is double
E
insulated in accordance with EN 60335.
Mains plug replacement
(U.K. & Ireland only)
• Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
D WALT repair agent or a qualified electrician.
E
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
• Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
• The cable wire colours, or a letter, will be marked
at the connection points of most good quality
plugs. Attach the wires to their respective points
in the plug (see below). Brown is for Live (L) (2)
and Blue is for Neutral (N) (4).
• Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the
outer sheath of the cable firmly and that the two
leads are correctly fixed at the terminal screws.
E N G L I S H
WALT NiCd
E
WALT NiCd and
E
en - 4