Measuring Cup - Philips HR2800/50 Manual De Instrucciones

Measuring cup

You can use the measuring cup to measure ingredients.
spatula
You can use the spatula when you process ingredients that are difficult to blend. You can use the
spatula while the blender is switched on or while it is switched off. You can also fit the measuring
cup on top of the spatula for better grip.
1 Put the ingredients to be processed in the blender jar.
2 Put the lid on the jar without the measuring cup.
3 Insert the spatula into the jar through the hole in the lid (Fig. 14).
Only use the spatula if the lid is fixed on the jar.
Do not use any other spatula than the one provided with this appliance.
4 Switch on the appliance.
Of course, you can also use the spatula while the blender is switched off.
5 Use the spatula when needed. Move it up and down or anti-clockwise for thorough
mixing (Fig. 15).
Note: You can safely move the spatula while the blender is running as long as the spatula rests on the lid.
cleaning
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
Tip: Cleaning the appliance and its parts is easiest immediately after use.
1 Make sure the appliance is switched off and unplugged.
2 Disassemble all removable parts from the motor unit.
1 Remove the lid with the measuring cup from the blender jar. If you have attached the spatula to
the measuring cup, detach it.
2 Lift the assembled blender jar off the motor unit (Fig. 16).
3 Turn the blade unit anti-clockwise (1) and remove it from the coupling unit (2) (Fig. 17).
4 Turn the dispenser anti-clockwise (1) and detach it from the coupling unit (2) (Fig. 18).
5 To clean the inside of the dispenser, turn the bottom part of the dispenser clockwise (1) and
remove the bottom part (2). (Fig. 19)
6 Remove the sealing rings from the dispenser, the blade unit and the blender jar.
Never detach the soft plastic part from the inside of the dispenser (Fig. 20).
3 Clean the motor unit with a moist cloth.
Never immerse the motor unit in water or any other liquid, nor rinse it under the tap.
4 Remove the coupling unit and the sealing ring from the blender jar.
5 Clean the removable parts in hot water, if necessary with some washing-up liquid, or in the
dishwasher.
All parts except the motor unit are dishwasher-proof.
storage
1 To store the mains cord, wind it round the reel in the bottom of the appliance (Fig. 21).
EnglisH
9