It is designed for use in clean,uncontami-
nated spill sumps. The spill sumps should
preferably be in metal or non-metallic (plastic)
materials. Outdoor use is not permitted.
SpillGuard® may only be used within the limits
for use defi ned on the nameplate. It is
suitable for Ex zone 0, due to gases and
vapours.
SpillGuard® may only be used as a precaution
with the liquids which have already been
positively tested by DENIOS. The list of
positively tested substances can be found
here:
www.denios.com/spillguard
The suitability of substances which are not in
the list must be tested.
i
INFORMATION
The resistance list contains a representative
selection of liquid hazardous substances. If
required, DENIOS can carry out a function
and resistance test for your substance. The
16/42
SpillGuard® Quick Guide | 271433 | Rev. 2
test includes checking that the substance is
correctly detected and also that the alarm
signal is then maintained for 24h (resistance
test).
2.3. Improper use
The product must not be used for the
following purposes:
Use in spill sumps for storing
W
non-approved media
Use in potentially explosive areas outside
W
the nameplate limits
Use in potentially explosive areas caused
W
by dust
Any use which is not expressly described
W
as permitted in this Quick Guide
WARNING
• If the housing is opened there is a risk of
an explosion in Ex atmospheres.
• This can cause severe injuries or death.
• Opening the housing is prohibited.