Kohler K-704410 Manual Del Usuario página 8

4. Install the Bottom Track
Apply a 1/4" (6 mm) bead of silicone sealant into the groove on the underside of the track.
Install the bottom track with the sealant side down and the front leg facing the outside of the
shower.
5. Install the Wall Jambs
Insert a #8-18 x 1-1/2" panhead screw through each of the four bumpers.
Place a wall jamb over the bottom track. Align the holes in the wall jamb with the holes in the wall.
Align the holes in the wall jamb with the holes in the wall and secure the wall jamb to the wall
with #8-18 x 1-1/2" panhead screws. Bumpers should be located in the top and bottom holes. Do
not overtighten. The bumper may lose its shape.
Repeat the procedures with the other wall jamb.
1015439-2-D
Bottom Track
Apply sealant
Front Leg
8
Bumper
#8-18 x 1-1/2"
Panhead Screw
Kohler Co.