Charger Mounting - GreenWorks CAM803 Manual Del Operador

OPERATION

CHARGER MOUNTING

1. This charger can be installed hanging on a wall using (2) #8 screws (not included).
2. Locate the placement for the charger to be wall mounted.
3. If fastening to wood studs use 2 wood screws (not included).
4. Drill two holes on center 5.0 in. (127mm) apart ensuring that they are vertically aligned.
5. If fastening to drywall use wall anchors (not included) and screws to secure the charger to the wall.
6. This unit is intended to be correctly orientated in a vertical or floor mount position.
NOTE: If the battery and the charger won't be used for a long time, remove the battery from the
charger and pull out the AC power plug.
9