Cleaning Before First Use; Assembly; Use - Imetec B7301 Instrucciones Para El Uso

• Unpack the appliance and remove any inserts or adhesive labels from the product.
• Remove the protection from the blades (3) [Fig. B].
• Wash the removable components: the blades (3) and the container (4) by hand with
soap and water or in the dishwasher without exceeding 55 °C.
• Clean the protection ring (2) with a damp, well-wrung sponge.
• Dry with a dry cloth.
• Insert the blades (3) on the pin (5) [Fig.C].
IMPORTANT!
• DO NOT use the chopper solely with liquid ingredients.
• DO NOT insert cheese rinds as they can damage the motor.
• DO NOT exceed the max level indicated on the container (4).
• For safety reasons, the appliance must not be used if the protection ring (2)
has not been properly installed.
• DO NOT introduce more than 50 g of raw meat or solid food.
• After 30 seconds of operation, let the appliance cool down for at least 2
minutes.
• After 5 continuous processing cycles, leave the appliance to cool down for
at least 30 minutes.
• Place the ingredients chopped into small portions in the container (4).
• Place the protection ring (2) inside the container (4) [Fig. D].
• Place the motor casing (1) on the container (4).
• Insert the plug (6) in the socket.
• Press the motor unit (1) down to operate the appliance [Fig. E].
• Release the motor casing (1) to stop the appliance.
• Before lifting the motor casing (1), wait for the blades (3) to stop.
• Remove the plug (6) from the socket.

CLEANING BEFORE FIRST USE

ASSEMBLY

USE

EN
9