Technical Data; Noise Information; Vibration Information - Ratio SR710NM Manual De Instrucciones

TECHNICAL DATA

Type SR710NM(PSJ -designation of machinery, representative of Jig Saw)
Voltage
Power input
No-load speed
Stroke length
Bevel capacity
Cutting capacity, max.
Wood
Aluminum
Steel
Protection Class
Machine Weight

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K & K 3.0dB(A)
PA WA
Wear ear protection

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 60745:
Cutting boards
Cutting steel metal
The declared vibration total value may be used for comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut .
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
28
L : 76,5dB(A)
pA
L : 87,5dB(A)
wA
Vibration emission value a
Uncertainty K = 1,5 m/s²
Vibration emission value a
Uncertainty K = 1,5 m/s²
230-240 V~50 Hz
= 6,6 m/s
2
h,B
= 6,5 m/s
2
h,M
710W
0-3000/min
20 mm
±45°
85mm
12 mm
6 mm
/II
2.21kg