Tabla de contenido
Publicidad
2. Connect the other end of the Power Cord to a power outlet.
Using the Battery Input (Optional)
For redundant power backup, connect an external battery (not
included) to the EdgePower.
Note:
Only one power source can be used at any one
time. With both power sources connected, the AC input
will be used; the battery input defaults to backup.
1. Connect the 3-pin terminal block connector of the Power
Cable with Ring Terminals to the Battery In port.
2. Wire the other end of the DC/DC power cable to an
external 12VDC battery.
Publicidad
Tabla de contenido
