Ubiquiti Networks EdgePower EP-24V-72W Guia De Inicio Rapido página 9

Tabla de contenido

Publicidad

Connecting Ethernet
1. Connect an Ethernet cable from your 24V PoE device(s) to
ports 1-2 on the EdgePower.
WARNING:
EdgePower Configuration Interface, ensure that the
connected PoE device supports 24V Passive PoE.
Connecting DC Output
1. Connect the 3-pin terminal block connector of the Power
Cable with DC Jack to the DC Out port.
2. Connect the other end of the DC/DC power cable to a
device with a DC jack.
Before enabling PoE passthrough in the

Publicidad

Tabla de contenido
loading

Tabla de contenido