Maintenance Regulations - geberit ACO 203 Manual Del Usuario

Error
The pressing tool stops
and no LED lights up.
Red and green LEDs flash
alternately.
Maintenance

Maintenance regulations

Interval
Regularly (before use, at the
start of the working day)
Every six months
After two years at the most
as per specifications on the
service sticker or when the
red and the green LEDs flash
alternately
45035998168595595-1 © 02-2019
968.361.00.0(01)
Cause
Rechargeable battery
is defective.
Maintenance interval
has been reached.
Maintenance work
▶ Inspect the pressing tool, rechargeable battery and battery
charger for externally visible defects and damage that
could affect safety.
▶ Clean and lubricate the pressing tool.
▶ Clean pressing attachments and check for defects, partic-
ularly for incipient cracks.
▶ Lubricate the pressing attachments. → See user manual
for the pressing attachments in question.
▶ Have the battery charger inspected for safety-related
defects or damage by an authorised repair shop.
However, this metrological measurement does not replace
any country-specific regulations and legislation that might
prescribe further checks and maintenance work.
▶ Have an authorised repair shop check the pressing force
and the state of wear.
Action
▶ Release start button.
▶ Press and hold release button: roller
drive moves to its starting position.
▶ Check the pressfitting for tightness
and repeat the pressing operation if
necessary.
▶ Replace the rechargeable battery
with a Geberit lithium-ion battery of
type Milwaukee 18 V.
▶ Have the defective rechargeable
battery tested by an authorised repair
shop.
▶ Have the pressing tool inspected by
an authorised repair shop.
EN
33