Device Description; Cleaning And Maintenance; Technical Data - Mesko MS 4060 Manual De Uso

22. The appliance is not intended for crushing ice, bone and other hard products or for
grinding nuts and coffee.
23. During the mixing process, never place your hands or cutlery into the container.
24. Observe the maximum uninterrupted operating time of the unit of 50 seconds. After the
continuous operating time of 50 seconds, wait 4 minutes before turning the unit back on.
Exceeding the operating time of the appliance and the absence of sufficient breaks can
lead to irreversible engine damage.
25. When the appliance is aged, unplug it from the mains before cleaning.
26. Before first use, wash thoroughly and dry the appliance (see: Cleaning and
maintenance).

DEVICE DESCRIPTION

1A – plug
1C – blender cup
1E – speed control button I
1G – base
DEVICE OPERATION
Before first use:
1. Remove all stickers from the housing, cup and cover of the blender.
2. Wash the blender cup in warm water with washing-up liquid, rinse thoroughly, dry the inside and outside of the cup.
Blender operation:
1. Put the blender main body (1D) on stable, level surface.
2. Place the blender cup (1C) on the body (1D).
3. Remove cover (1B) from the blender cup (1C), put in the ingredients to be mixed. In order to avoid overflow, the level of ingredients in
the cup should not exceed ¾ of cup's height.
4. Connect the power plug to the power outlet.
5. Turn the blender on by holding adequate button (1E or 1F) depending on wanted rotation speed.
NOTICE: During mixing always hold cup (1C) with hand.
6. After the mixed products have proper consistence, turn the blender off by releasing the button (1E or 1F). Wait until the blades stop.
Remove the power plug from the power outlet. Remove the cup.
NOTICE: Do not allow continuous operation of blender for longer than 3 minutes.

CLEANING AND MAINTENANCE

Make sure that the blender is disconnected from the power.
1. Wash the cup, cover and blades in water with washing-up liquid. In order to wash the cup thoroughly put some water with washing-up
liquid in the cup, connect the blender to the power, and operate it for a short period of time. Then pour out the water, rinse thoroughly
and dry.
2. Clean the stained body (1D) with moist cloth, and then wipe dry.
NOTICE: Don't immerse blender body in water or other liquids.
NOTICE: Do not wash any blender parts in dishwashers.

TECHNICAL DATA

Power: 250W Max.: 500W
Voltage: 220-240V~50/60Hz
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE
ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN
SIE DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1.Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund
von bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.
1B – cover
1D – body
1F – speed control button II
DEUTSCH
4