Honeywell Home HM700AFVALVE Instrucciones De Instalación página 2

HM700AFVALVE
Step 4
Installing new Fill Valve
1. If necessary, reposition valve's metal bracket by
sliding it out. By pulling the solenoid out of the
valve, you may orient the terminals in a more
convenient direction.
2. Place new Fill Valve into port.
3. Use provided machine screws (replacing those
removed in Step 3) to fasten the valve onto the
wall of the unit.
4. Screw fitting back onto valve.
Resideo Inc., 1985 Douglas Drive North,
Golden Valley, MN 55422
www.resideo.com 33-00158EFS—03 M.S. Rev. 08-19 | Printed in United States
This product is manufactured by Resideo Technologies, Inc., Golden Valley, MN, 1-800-468-1502
©2019 Resideo Technologies, Inc. The Honeywell Home trademark is used under license from Honeywell International Inc. All rights reserved.
Step 5
1. Place spring clamp (provided) onto hose.
2. Slide hose onto valve, then slide spring clamp
around valve nozzle. Ensure that the clamp is
tight around the valve to avoid leaks.
3. Reconnect wires to solenoid.
Step 6
1. Restart unit. Observe components and connec-
tions for leaks.
For more information on maintenance and
replacement, please visit http://honeywellhome.com
or call 1-800-468-1502 or 1-800-814-9452