Samsung RS26DDA Serie Manual De Instrucciones página 13

SETTING UP THE REFRIGERATOR(CONT'D)
If your entrance won't allow the refrigerator to pass easily through it, you can remove the doors.
Tools you will need
Philips Scr ewdriver
Removing the Front Leg Cover
First, open both the freezer and refrigerator doors, and then take o the front leg cover by turning the
three screws counter-clockwise.
Separating the water supply line from the refrigerator
1. Remove the water tube by pressing the coupler
Do not cut the water line. Gently separate it fr om the coupler.
Reattaching the water supply line
1. While pressing the fr ont face of coupler
, insert the water line
2
Car efully place front cover and push to
snap it into position.
2. Insert 1 clip in plastic bac and check that it
holds the line rmly
The water line must be fully inserted to
the marked line to pr event water leakage fr om the dispenser .
Flat-blade Scr ewdriver
2
1
Line
in the coupler.
1
10mm Socket W rench
FRONT LEG COVER
SCREW
and pulling the water tube
2
Coupler
1 2
Clip A (1/4º )
Coupler
away.
1
Line
Coupler
setting up_13