FITFIU FITNESS RA-200 Manual Usuario página 33

STEP 4
Secure the left and right pedals (32) to the main frame (1) with four M12×160 hex screws (30). Tighten the screws with
the wrench provided.
STEP 5
To install the display, remove the two M5x10 Phillips screws (15) from the U-shaped tube of the main frame (1).
Attach the display support plate (6) to the U-shaped tube of the main frame (1) with the two M5x10 Phillips screws (15)
removed earlier. Tighten the screws with the supplied wrench/screwdriver.
Connect the extension sensor cable (72) to the cable coming from the display. Then fix the display (17) on the mounting
plate (6).
The assembly is now complete!
72
1
32
30
17
15
6
72
1
32
30
33
RA-200
EN