Using The Product - FITFIU FITNESS RA-200 Manual Usuario

USING THE PRODUCT

DISPLAY
The display shows current information such as distance, elapsed or remaining time, remaining calories, etc.
BUTTONS
• MODO: Select the desired function. To reset all function values, press and hold
the key for 4 seconds.
• SET: Press this button to set the value of the selected functions.
• RESET: Press this button to clear the value of the current function.
FUNCTIONS
• AUTO ON/OFF: The monitor will turn on when you start paddling or when you
press MODE. The monitor will turn off after being idle for 4 minutes.
• TIME: Count your training time while exercising.
• DISTANCE (DIST): Displays the distance accumulated during the exercise.
•
STROKE COUNTER (COUNT): Count your strokes while exercising.
• TOTAL STROKE COUNTER (T.COUNT): Shows the total accumulated strokes.
• CALORIES (CAL): Displays calories expended during exercise.
• SCAN: Scan through each function between TIME, CAL, DIST, COUNT, T.COUNT repeatedly.
RANGE OF VALUES
• TIME - 00:00 to 99:59 minutes/seconds.
• DISTANCE - 0 to 9999 KM.
• CALORIES - 0 to 9999 Kcal.
• STROKE COUNTER: 0 to 9999 strokes.
BATTERY
If there is a problem with the display, try replacing the battery. The display uses two "AAA" batteries.
To remove the battery remove the display from the main frame and disconnect the connection cables, replace the
batteries and reconnect the connection cables and place it in the main frame.
NOTE: Do not mix old and new batteries or battery types.
ADJUSTMENTS
PEDAL
The pedal strap is adjustable and can be customised to fit the size of the user's foot.
To tighten, pull the velcro towards the side of the strap.
RESISTANCE
Turn the resistance adjuster clockwise to increase the resistance level. Turn the adjuster
counterclockwise to decrease the resistance level.
35
RA-200
EN