Operation - Klarstein Heizung Manual Del Usario

Ocultar thumbs Ver también para Heizung:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Inserting batteries into the remote control

OPERATION

Press the Standby button (f) to turn on the unit. The product is now in standby mode.
You can now select a function from the control panel or remote control. The unit beeps
and the power indicator (plug symbol) lights up. A beep sounds each time the button is
pressed.
Press the standby key (f) to exit the standby mode and select one of the modes with .
Heating starts with low power operation.
Setting the heat output
Press the Power/Mode button (c) repeatedly to select one of the following heat outputs:
Low (
), Medium (
medium power and high power, the heater will keep the power constant.
Note: The higher the power, the faster the desired temperature will be reached but
the power consumption will increase. We recommend a lower power level if the
heater is to be used for a longer period of time.
), High (
) and Eco mode (ECO). For low power,
EN
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

10034253

Tabla de contenido