Sunbeam 89020 Instrucciones De Operación página 4

NOTE: WHEN SETTING YOUR ALARM TIME, BE SURE TO SET IT CORRECTLY
IN THE "AM" OR "PM" MODE. YOUR CLOCK HAS A 24 HOUR MEMORY ALARM. IF
YOU WISH TO BE AWAKENED AT THE SAME TIME THE NEXT DAY, SIMPLY LEAVE
THE RADIO SWITCH (10) IN THE WAKE TO ALARM POSITION. THERE IS NOT NEED
TO READJUST ANY CONTROLS AS LONG AS YOU WISH TO BE AWAKENED AT THE
SAME TIME EVERYDAY. IF YOU DO NOT WANT TO BE AWAKENED WITH THE
ALARM THEN MOVE THE RADIO SWITCH (10) TO THE "OFF" POSITION.
SLEEPING TO MUSIC:
• If you like to fall asleep while listening to music simply push down the SLEEP
button (4) and the radio will turn "ON" for 59 minutes. By holding down sleep
button (4) and pressing HOUR button (1) up to 1 hour and 59 minutes can be set.
• A shorter sleep period can be set by pressing and holding the SLEEP button
while pressing the MINUTE button (2) until desired time is reached.
• The RADIO may be turned off at any time during sleep function by simply
touching the SNOOZE BUTTON.
• For proper operation of this function the RADIO SWITCH (10) can not be in the
"ON" position.
TO USE THE NIGHT LIGHT:
1. Slide the NIGHT LIGHT SWITCH (11) from the "OFF" position to "ON" position
to illuminate night light (12).
2. Slide the NIGHT LIGHT SWITCH to "OFF" position to turn it off.
TO CHANGE THE NIGHT LIGHT BULB:
1. From the bottom, push down and slide the NIGHT LIGHT LENS forward from the
Clock Radio.
2. Replace bulb with a screw -in type E-10, 6V 0.24A.
3. Replace the NIGHT LIGHT LENS.
TO CHANGE THE SNOOZE BULB:
1. Lift the snooze lens with a fingernail to remove it from the radio.
2. Replace bulb with a screw-in type E-5, 6V 50MA.
3. Place snooze lens back in position and push firmly to click in place.
MP3 WIRE AND PLUG
To play a MP3 player through this clock radio, a wire with plug (15) has been provided
for connecting. Set the MP3 player next to the clock radio and insert the plug into the
headphone jack of the MP3 player. Move RADIO/MP3 switch (16) to MP3 position.
Move the ON/OFF/AUTO switch (10) to the ON position. To disconnect, remove
plug from headphone jack and slide RADIO/MP3 switch to RADIO position. Be sure
to push wire into clip (17) to keep it from being damaged.