JVC BD-X201MS Manual De Instrucciones página 69

SYSTEM MENU (2/2) screen
Parameter Possible settings
AC IN MODE [POWER ON]
POWER OFF
AC
SYNC SYSTEM [AUTO]
INTERNAL
SYNC [AUTo]
TV TYPE [NTSC (U)]
NTSC (I)
TV
VBID OUT (WIDE)
Vbid
Y/C TERMINAL
MODE
Y C TM
OPERATION
LOCK
oPLoCK
All manuals and user guides at all-guides.com
For selecting whether to start up in the Operate ON or OFF mode when the MAIN POWER
switch at the rear of this unit is turned ON.
POWER ON : Start up in Operate ON mode
[oN]
POWER OFF: Start up in Operate OFF mode
oFF
For selecting the synchronization method for this unit.
AUTO : Switches automatically between internal and external synchronization
INTERNAL : Set to internal synchronization
INTE
For selecting the signal system during recording and playback.
NTSC (U) : When recording/playing back in the NTSC mode (for USA)
NTSC (I) : When recording/playing back in the NTSC mode (for Japan)
PAL
PAL : When recording/playing back in the PAL mode
[NTU]
This unit will automatically be rebooted when this setting is changed.
NTI
Upon reboot, all menu items except the date/time data and hour meter will be restored to their
PAL
default values.
[OFF] For selecting whether to add the JCPX-1204 standard-compliant VBID (Video Blanking ID) sig-
nals to the analog video signals output from this unit. (NTSC only)
ON
OFF : Do not add VBID signals (Copyguard signals will be added.)
[oFF]
ON : Add VBID signals
oN
[S1]
This parameter is used to set the specification for the DVD recorder's VIDEO Y/C INPUT and
OUTPUT terminal in order to enable the recording of wide-screen discrimination signals.
S2
S1 : S1 terminal mode is to be adopted. A discrimination signal for normal video with a
4:3 aspect ratio and squeezed video is to be recorded.
S2 : S2 terminal mode is to be adopted. A discrimination signal for normal video with a
4:3 aspect ratio, squeezed video, and letterbox video is to be recorded.
[S1]
S2
Squeezed video: 16:9 wide-screen content with the left and right sides compressed for nor-
Letterbox video : Content with the top and bottom of the screen blackened out.
[OFF] For selecting whether to enable operation lock.
OFF : Operation lock turns OFF and all operation buttons on the main unit are enabled
ON
ON : Operation lock turns ON and operation buttons on the main unit are disabled
[oFF]
However, the CLOSE/OPEN, SET UP, SET and cursor buttons will not be dis-
oN
abled.
Description
mal aspect screens.
Setup Menu
E-69